Description
Velcro polishing wool buff
Diameter: 125mm
Use backing pad:SPC00120
Application:
The polishing wool buff should be used with an automotive polisher. Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with velcro. Make sure the diameter of the polishing buff is the same as the backing pad’s diameter.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
TIP:
The buff is washable after use if the polishing compound is soluble.
Velcro polishing wool buff range:
| ORDER NO. | DIAMETER | USE BACKING PAD |
| SPC00123 | 125mm | SPC00120 |
| SPC00125 | 180mm | SPC00119 |
Recommended polishing compounds to use:
- Liquid Shine High cut – Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.
- Liquid Shine Fine cut – similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.
- Liquid Shine Zero swirl – Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step
