Description
Mandrel for hole saws
Mandrel shank: 7/16′ hex
Drill bit diameter: 6.35mm
Hole saws: Carbide grit 32-152mm
Application:
Use the mandrel with Carbide grit hole saws that are able to cut into stone, masonry, concrete paving, fibre reinforced plastic, wood and cement board.
The mandrel range:
14-30mm no pins:
TC17002 – Mandrel for Bi-metal hole saws.
TC17002-2 – Mandrel for Carbide grit hole saws.
TC17002-3 – Mandrel for Diamond coated hole saws.
TC17002-4 – Mandrel for TCT hole saws.
32-152mm with pins:
TC17007 – Mandrel for Bi-metal hole saws.
TC17007-2 – Mandrel for Carbide grit hole saws.
TC17007-3 – Mandrel for Diamond coated hole saws.
TC17007-4 – Mandrel for Tungsten Carbide Tipped (TCT) hole saws.
Mandrel replacement pilot drill bits:
- 6.35 x 115mm (extra long) for bi-metal hole saws – TC00001
- 6.35 x 70mm for bi-metal hole saws – TC00002
- Tungsten Carbide Tipped (TCT) series hole saws -TC00003
- Carbide grit hole saws – TC00004
- Diamond coated hole saws – TC00006
