Description
16PC masonry drill bit set
Drill bits in the set:
- 3mm (x2)
- 4mm (x2)
- 5mm
- 6mm
- 7mm
- 8mm
- 9mm
- 10mm
- 11mm
- 12mm
- 13mm
- 14mm
- 15mm
- 16mm
Application:
The drill bits in the set are used to drill into masonry, thanks to the uniquely designed TCT (tungsten carbide tipped) point.
A percussion (hammer action) drill with a 3 jaw chuck is required. Preset the depth gauge on the drill to achieve the correct depth before drilling into walls.
TIP:
Have a wall scanner (detector) ready before drilling into walls.
CAUTION:
Do not use the drill bits in the set with a rotary hammer. The impact energy will break the conversion chuck.
